CURSOS
Escuela y Educador de Soldadura

ORBITAL TIG WELDING

RANGE OF HEADS FOR SPECIAL APPLICATIONS

Selección Orbitales

Cabezal abierto con aporte hilo
Soldadura orbital
Soldadura orbital codos
Soldadura orbital tubo placa
Equipo soldadura orbital programable
SPECIAL HEAD FOR U-TUBE WELDING

Wide range of heads for U-tube joints

Technical Features

Range of welding heads SIMULTANEOUS for the two joints that form the “U” in these heat or chemical exchanger tubes.

Welding process: TIG without wire feeding
Welding position: plate in the horizontal plane
Tube diameter: from 9,52 mm to 22 mm

Welding current: 80 A DC max pulse ; 50 Amp continuous
Electrode/plate height: 13,5 mm
Diameter of tungsten electrode: 1,0 ÷ 2,4 mm
Engine rotation: standard, 24 VDC
Rotation speed: 0,10 ÷ 16,34 rpm
Torch centering: with elastic clamp
Torch refrigeration: water
Weight: 1,100 Kg
Power supply connection cable: L = 4 m ; Kg 3,500
Power supply: 24 Vdc

Soldadura orbital doble
Orbital soldadura tubos U
LARGE DIAMETER PIPE HEAD

TIG welding for large diameter and/or wall thickness tubes

Technical Features

Diameter of tubes Ø min 6” uo to 36″ – just choose the right size ring.
TIG process with wire feed
Integrated AVC system and torch oscillation for great wall thickness in multi-pass.

Welding position: Horizontal / vertical / inclined
Welding current: Max. 250 at 100% ED (10 min at 40ºC)
Torch refrigeration: water
Shielding gas flow: Gas-lense and ceramic nozzle
AVC and oscillation speed: Max. 300 mm/min
Head rotation speed: up to 469,3 mm/min
Filler wire speed: Max. 200 cm/min
Diameter of wire: 0,6 – 1,2 mm (coil D100-1kg)
Connection cable: L = 8 m (others on demand)
Power supply: 24 Vdc

Cabezal soldadura orbital

The head locks into the peripheral rail quickly and easily.

Lightweight rails that are positioned by a clamp mechanism that effectively centers the torch in the joint.

The AVC system and oscillation is controlled by a safe electronic system.

OPEN HEAD MOD. 320 FOR WORKBENCH

Tube diameter Ø 5 – Ø 18 mm - TIG welding without welding supply

Technical Features

Specially designed head to be placed on the workbench while feeding the different joints to be welded.

Welding process: TIG
Welding position: Flat / Vertical
Torch refrigeration: water

Tube diameter: 5 to 18 mm
General dimentions: H=100 mm ; L=190 mm ; W=160 mm

Diameter of tungsten electrode: 1,0 ÷ 2,4 mm
Head width, from the centre of the electrode to the rear: 96 mm
Rotation speed: 0,30 ÷ 4,55 rpm
Weight (complete head): 12,30Kg

Welding current: 130 / 150 A DC max Continuous / Pulsed
Connection cable to power supply: L = 4 m (3,500 Kg)
Power supply: 24 Vdc

Orbital-Banco-Soldadura
× Ayuda / Help