Compatible with open and closed heads, economical solution for thickness up to 3 mm
Welding process: TIG
Power: 6,0 KVA
Power consumption: 16 A max
Power factor: 0,99/86%
Current regulation range: 5-160 A
Maximum welding intensity: 200 A (35%) / 140 A (100%)
Maximum open circuit voltage: 90 V
Permissible input power fluctuations: 15%
Protection: IP 32
Power source: 230 V (-40% a + 15%)
Internal forced air cooling fan
PROGRAMMER / GENERATOR complete with:
– 7″ color touch screen, with rotary front encoder
– 24-column impact printer, regular paper
– Integrated refrigerator with level indicator, temperature indicator and flow rate indicator.
– USB interface, for user registration and program transfer
– Key for anchoring welding programs
– Simplified programming
– Remote control for manual movements of the welding head and selection of the start/end position of the welding cycle (optional)
– WiFi connection, for Industry 4.0 compatibility
– Registration in both Local / Remote for the stored welds
– Option: synchronization of oxygen presence measurements for purging
Technical Features of the Programmer:
– Welding procedure on the LCD display: TIG without or with wire feed
– Welding cycle identification number and the sector being welded continuously on the LCD display
– Adjustment of the automatic welding parameters, according to the characteristics of the pipe and the connected welding machine.
– Up to 10 sectors can be programmed for each weld selectable to the torch position
– Security system to prevent lack of liquid cooling, protective gas, engine rotation or overheating of the wire feeder
– Internal memory for 100 welding programs
– Welding current duty cycle: T max 0.01 – T min 2.5 s
– Pre-gas/Post-gas – Start ramp/REnd ramp adjustable from 0 to 25 s
– Start position selectable and programmable in degrees (from 12) or in time
– Dimensions WxHxL: 450 x 400 x 510 mm
– Weight: 30 Kg
Compatible with open and closed heads, economical solution for thickness up to 3 mm
Welding process: TIG
Power: 22,5 KVA
Power consumption: 11,5 KVA
Intensity during weld: 210 A (100%)
Maximum welding intensity: 300 A (35%)
Max. open circuit voltage: 63 V
Protection: IP 32 / “H”
Power source: 400 V 3/Ph 50/60 Hz ± 15%
Dimensions: 500 – 800 – 1000 mm
Weight: 80 kg
Water refrigerator and integrated bottle carriage
Remote control PROGRAMMER complete with:
– 4″ color touch screen, with rotary front encoder
– 24-column impact printer, regular paper
– USB interface, for user registration and program transfer
– Key for anchoring welding programs
– Simplified programming
– Remote control for manual movements of the welding head and selection of the start/end position of the welding cycle (optional)
– Security system to prevent lack of liquid cooling, protective gas, engine rotation or overheating of the wire feeder
– Internal memory for 100 welding programs
– The parameters for up to 10 sectors of the perimeter can be defined for each necessary pass until the joint is filled.
– Multilingual programming
High precision MIG orbital welding
Welding process: MIG
MIG DC current control range: 10-500 A
Intensity: 500 A @ 60% // 380 A @ 100%
– welding cycle in 10 min at 40ºC
Nominal power: 21 KVA
Open circuit voltage: 65 V
Protection: thermal
Type of protection: IP 23 / “H”
Power supply: 400 V 3/Ph 50/60 Hz +/- 10%
Dimensions LxAxL: 470 x 720 x 1400 mm
Weight: 150 Kg
PROGRAMMER / GENERATOR complete with
– Integrated water cooling unit, capacity 4 l
– Carriage with bottle holder
– Paper printer
– Touch screen remote control for parameter programming l
– USB interface for memory stick, uploading and downloading programs
