CURSOS
Escuela y Educador de Soldadura

ORBITAL TIG WELDING

RANGE OF OPEN HEADS

Selección Orbitales

Cabezal abierto con aporte hilo
Soldadura orbital
Soldadura orbital codos
Soldadura orbital tubo placa
Equipo soldadura orbital programable
Aplicación Tubo-Tubo
Aplicación Tubo-Codo
Aplicación Tubo-Brida
Aplicación Tubo-Tubo
Aplicación Tubo-Codo
Aplicación Tubo-Brida
 
OPEN HEAD MOD. 211

Tube diameter Ø 10 - Ø 76.33 mm - TIG welding without wire feed

Technical Features

Tube diameter: up to 76,33 mm
General Dimensions: 180 mm
Head width, from the centre of the electrode to the rear: 76 mm
Rotation speed: 0,10 – 2,36 rpm
Weight (complete head): 4,300 Kg

Cabezal abierto orbital
OPEN HEAD MOD. 212

Tube diameter Ø 10 - Ø 114,3 mm - TIG welding without wire feed

Technical Features

Tube diameter: up to 114,3 mm
General dimensions: 210 mm
Head width, from the centre of the electrode to the rear: 96 mm
Rotation speed: 0,10 – 1,38 rpm
Weight (complete head): 6,500 Kg

Orbital cabezal abierto
OPEN HEAD MOD. 214

Tube diameter Ø 10 - Ø 168,3 mm - TIG welding without wire feed

Technical Features

Tube diameter: hasta 168,3 mm
General dimensions: 280 mm
Head width, from the centre of the electrode to the rear: 96 mm
Rotation speed: 0,10 – 0,70 rpm
Weight (complete head): 11,0600 Kg

Soldadura orbital cabezal abierto
OPEN HEAD MOD. 211F

Tube diameter Ø 10 - Ø 76.33 mm - TIG welding with wire feed

Welding process: TIG with and without wire feed
Welding position: Flat / Cornice / Vertical / Inclined
Head positioning: Supported by counterbalance
Torch centering: With elastic clamps and micrometric screw for axial adjustment (± 5 mm)
Torch refrigeration: water
Torch inclination: Standard 30°/45°; other inclinations on request
Diameter of tungsten electrode: 1,0 ÷ 2,4 mm
Electrode positioning: 21 ± 5 mm
Welding current: 170 A DC max Pulsed / Continuous
Electrode-bath distance adjustment: With spherical tester and radial linear movement (except models with AVC system)
Connection cable: L = 8 m (5,500 Kg)
Power supply voltage: 24 Vdc

Wire feeding unit: Mounted on the head
Wire feeding speed: 10 ÷ 200 cm/min
Wire feed engine: Standard 24 VDC or with optional tachometer
Wire feeding coil: Standard Ø 4″ (100 mm) – Small coil 1 kg
Wire diameter: 0,6 ÷ 1,2 mm
Weight of wire feeding unit: 1,150 Kg (without coil)

Technical Features

Tube diameter: up to 76,33 mm
General dimension: 150 mm
Head width, from the centre of the electrode to the rear: 76 mm
Rotation speed: 0,10 – 2,36 rpm
Weight (complete head): 4,300 Kg

Cabezal abierto orbital
OPEN HEAD MOD. 212F

Tube diameter Ø 10 - Ø 114.3 mm - TIG welding with wire feed

Welding process: TIG with and without wire feed
Welding position: Flat / Cornice / Vertical / Inclined
Head positioning: Supported by counterbalanced balance
Torch centering: With elastic clamps and micrometric screw for axial adjustment (± 5 mm)
Torch refrigeration: water
Torch inclination: Standard 30°/45°; other inclinations on request
Diameter of tungsten electrode: 1,0 ÷ 2,4 mm
Electrode positioning: 21 ± 5 mm
Welding current: 170 A DC max Pulsed / Continuous
Electrode-bath distance adjustment: With spherical tester and radial linear movement (except models with AVC system)
Cable de conexión: L = 8 m (5,500 Kg)
Power supply voltage: 24 Vdc

Wire feeding unit: Mounted on the head
Wire feeding speed: 10 ÷ 200 cm/min
Wire feed engine: Standard 24 VDC or with optional tachometer
Wire feeding coil: Standard Ø 4″ (100 mm) – Small coil1 kg
Wire diameter: 0,6 ÷ 1,2 mm
Weight of wire feeding unit 1,150 Kg (without coil)

Technical Features

Tube diameter: up to 114,3 mm
General dimensions: 210 mm
Head width, from the centre of the electrode to the rear: 120 mm
Rotation speed: 0,10 – 1,38 rpm
Weight (complete head): 7,00 Kg

Cabezal abierto con aporte hilo
OPEN HEAD MOD. 214F

Tube diameter Ø 10 - Ø 168.3 mm - TIG welding with wire feed

Welding process: TIG with and without wire feed
Welding position: Flat / Cornice / Vertical / Inclined
Head positioning: Supported by counterbalance
Torch centering: With elastic clamps and micrometric screw for axial adjustment (± 5 mm)
Torch refrigeration: water
Torch inclination: Standard 30°/45°; other inclinations on request
Diameter of tungsten electrode: 1,0 ÷ 2,4 mm
Electrode positioning: 21 ± 5 mm
Welding current: 170 A DC max Pulsed / Continuous
Electrode-bath distance adjustment: With spherical tester and radial linear movement (except models with AVC system)
Connection cable: L = 8 m (5,500 Kg)
Power supply voltage: 24 Vdc

Wire feeding unit: Mounted on the head
Wire feeding speed: 10 ÷ 200 cm/min
Wire feed engine: Standard 24 VDC or with optional tachometer
Wire feeding coil: Standard Ø 4″ (100 mm) – Small coil 1 kg
Wire diameter: 0,6 ÷ 1,2 mm
Weight of wire feeding unit 1,150 Kg (without coil)

Technical Features

Tube diameter: up to 168,3 mm
General dimensions: 280 mm
Head width, from the center of the electrode to the rear: 120 mm
Rotation speed: 0,10 – 0,70 rpm
Weight (complete head): 12,00 Kg

Cabezal abierto con aporte hilo
× Ayuda / Help